DESCRIPTION
The module includes a baseband processor with 4 Mbit Flash memory, a radio solution, antenna interfaces and application supporting circuitry. The ROK 104 001 comes with either the Embedded Communication Platform (ECP) firmware, providing the full Bluetooth software stack, including profiles for serial communication, or with the basic Bluetooth firmware for signaling at the HCI (Host Controller Interface) level. OD UCT BR I EF Since this solution is also FCC and ETSI type approved on delivery, cost and time for qualification and type approval is greatly minimized. s Bluetooth -Firmware in two versions: -a) Serial Communication (GAP/SPP/DUN/LAN) -b) HCI : Standard Bluetooth Interface Point- to -Multipoint, 7 slaves with the HCI firmware or 3 slaves with embedded stack Power management: PARK, SNIFF & HOLD as well as system power saving Pre-qualified for Bluetooth spec. 1.1 FCC & ETSI type approved Multiple interfaces UART, PCM, Bidirectional serial interface/GPIO, GPIO Voltage...
Infineon Technologies
