Datasheet4U Logo Datasheet4U.com

TLD1312EL Datasheet Three Channel High Side Driver

Manufacturer: Infineon

Overview: LITIX™ Basic TLD1312EL 3 Channel High-Side Current Source Package PG-SSOP-14 Marking TLD1312 1 Overview Applications • Exterior LED lighting applications such as tail/brake light, turn indicator, position light, side marker,... • Interior LED lighting applications such as ambient lighting, interior illumination and dash board lighting. TAIL BRAKE GND IS O-Pu lse protection circuit depending on req uire ment s ** For EMI improvement if required CPWMI RPWMI RSET GND Cmod=2.2µF 10kΩ CVS =4.7nF VS EN Internal supply Thermal protection IN_SET Current adjustment PWMI Output control TLD1312EL Application Diagram with TLD1312EL Data Sheet .infineon. OUT3 OUT2 OUT1 4.7nF** 4.7nF** 4.7nF** Rev. 1.

General Description

The LITIX™ Basic TLD1312EL is a three channel high side driver IC with integrated output stages.

It is designed to control LEDs with a current up to 120 mA.

In typical automotive applications the device is capable to drive i.e.

Key Features

  • 3 Channel device with integrated output stages (current sources), optimized to drive LEDs with output current up to 120 mA per channel.
  • Low current consumption in sleep mode.
  • PWM-operation supported via VS- and EN-pin.
  • Integrated PWM dimming engine to provide two LED brightness levels without external logic (e. g. µC).
  • Output current adjustable via external low power resistor and possibility to connect PTC resistor for LED protection during over tempe.

More Datasheets from Infineon

Part Number Description
TLD1310 3 Channel High Side Current Source
TLD1310EL 3 Channel High Side Current Source
TLD1311EL three channel high side driver
TLD1313EL three channel high side driver
TLD1314EL Basic LED Driver
TLD1315EL 3 Channel High Side Current Source
TLD1326EL 3 Channel High Side Current Source
TLD1114 LITIX Basic+ LED Drivers
TLD1114-1EP LITIX Basic+ LED Drivers
TLD1120 1 Channel High Side Current Source LED Driver

TLD1312EL Distributor