TLD7002-16ES Datasheet | Infineon

LITIX™ Pixel Rear Multi-channel LED driver Features - 16 channel device with integrated and protected output stages, optimized to drive LEDs - High regulated output current up to 76.5 m A per channel - Parallel output operation for higher load currents - 16 independent 6-bit configurable global output current configurations ranging from 5.625 m A to 76.5 m A - 16 independent 14-bit PWM engines from 100 Hz up to 2 k Hz - Configurable thermal derating - Configurable LED Open, Short and Single-LED-Short thresholds - Digital feedback of external two voltage measurements (NTC/PTC) - Integrated HSLI transceiver, CAN-FD physical-layer patible up to 2 MBit/s - Developed according to ISO26262 with process plying to ASIL-B Potential applications - Open-drain LED driver with high-speed lighting interface (HSLI - UARTover CAN) - Automotive rear light functions such as tail, stop and sequential (dynamic) turn indicator - Animated light functions like “wele/goodbye” functions - Interior lighting functions for ambient lighting (RGB color control), illumination and dash board lighting - LED panels for industrial applications and instrumentation Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description The TLD7002-16ES is a 16 channel device with integrated and protected output stages. It is designed to control LEDs with a current up to 76.5 m A as linear current sink (LCS). The power stages can be configured in parallel for higher load currents. Each individual power output stage is configured to a 6-bit current set value stored in the OTP. 16 independent and individual PWM configurations can be set. A high-speed lighting interface is used for device OTP programming, configuration, control and diagnostic feedback. TLS41xx PGND FREQ AGND VLED LIN BUS VCC1 VS CSN CLK SDI SDO LIN Tx D LIN Rx D LIN Tx D CAN Rx D CAN SBC TLE9262 CANH CAN CANL GND CSN CLK Micro...