Infineon Technologies TLE5012BD
The TLE5012BD GMR-based angle sensor is designed for angular position sensing in automotive applications such as: • Electrical commutated motor (e.g. For all parameters which are not specified here, the TLE5012B datasheet is valid. About this document This document is an addendum to the TLE5012B datasheet and describes the TLE5012BD dual die angle sensor.| Part No. | TLE5012BD |
|---|---|
| Datasheet | TLE5012BD Download |
| Manufacturer |  Infineon Technologies |
| Description | Angle Sensor |
| Buy | Stock & Price |
FEATURES
● Giant Magneto Resistance (GMR)-based principle● Fully redundant design with two sensor ICs in one package
● Integrated magnetic field sensing for angle measurement
● 360° angle measurement with revolution counter and angle speed measurement
● Two separate highly accurate single bit SD-ADC
● 15 bit representation of absolute angle value on the output (resolution of 0.01°)
● 16 bit representation of sine / cosine values on the interface
● Max. 1.0° angle error over lifetime and temperature-range with activated auto-calibration
● Bi-directional SSC Interface up to 8 Mbit/s
● Supports Safety Integrity Level (SIL) with diagnostic functions and status information
● Interfaces: SSC, PWM, Incremental Interface (IIF), Hall Switch Mode (HSM), Short PWM Code (SPC, based on SENT protocol defined in SAE J2716)
● Output pins can be configured (programmed or pre-configured) as push-pull or open-drain
● Bus mode operation of multiple sensors on one line is possible with SSC or SPC interfac...
