TLE8888-1QK Datasheet PDF - Infineon Engine Management System Specs

TLE8888-1QK - Engine Management System

Datasheet Summary

Description

The TLE8888-1QK is a U-Chip suitable for automotive engine management systems.

It contains the basic functionality to supply the microcontroller and the ECU, establish the communication on- and off- board and drive EMS typical actuators.

Furthermore it controls the main relay driver.

Features

Voltage pre-regulator.
Integrated 5 V regulator.
2 integrated 5 V trackers.
Standby regulator.
Separate internal supply.
Voltage monitoring.
High speed CAN interface with wake-up by bus.
LIN interface with high speed mode for K-Line operation.
Variable reluctance sensor interface.
Microsecond Channel interface (MSC) with low voltage differential signal (LVDS) inputs pads for low EME.
SPI and direc.

Datasheet Details

Part number	TLE8888-1QK
Manufacturer	Infineon
File Size	6.18 MB
Description	Engine Management System
Datasheet	TLE8888-1QK Datasheet
Additional preview pages of the TLE8888-1QK datasheet.

📁 Similar Datasheet

TLE8102SG - Smart Dual Channel Powertrain Switch coreFLEX (Infineon Technologies)

TLE8104E - Smart Quad Channel Powertrain Switch (Infineon Technologies)

TLE8108EM - Smart 8-Channel Low Side Relay Driver (Infineon Technologies)

TLE8110EE - Smart Multichannel Low-Side Switch (Infineon Technologies)

TLE8201R - Door Module Power (Infineon Technologies)

TLE8203E - Mirror Power (Infineon Technologies)

TLE8209-2 - SPI Programmable H-Bridge (Infineon Technologies)

TLE8209-2SA - SPI Programmable H-Bridge (Infineon Technologies)

TLE8209-4SA - SPI Programmable H-Bridge (Infineon Technologies)

TLE8242-2 - 8 Channel Fixed Frequency Constant Current Controller (Infineon Technologies)

Full PDF Text Transcription

Click to expand full text

TLE8888-1QK Engine Machine System IC 1 Overview Quality Requirement Category: Automotive Features • Voltage pre-regulator • Integrated 5 V regulator • 2 integrated 5 V trackers • Standby regulator • Separate internal supply • Voltage monitoring • High speed CAN interface with wake-up by bus • LIN interface with high speed mode for K-Line operation • Variable reluctance sensor interface • Microsecond Channel interface (MSC) with low voltage differential signal (LVDS) inputs pads for low EME • SPI and direct control inputs for high flexibility • Main relay driver • Ignition Key detection with key off delay output • Wake-up input • Engine off timer • 4 low-side power stages especially to drive injectors (Ron = 550 mΩ) with enable input • 3 low-side power stages (Ron = 350 mΩ) • 6 push pul

Published: Mar 2, 2016 |