TLE9221SX Datasheet | Infineon

Flex Ray Transceiver Overview Features - pliant with the Flex Ray Electrical Physical Layer Specification, version 3.0.1 and ISO 17458 - Optimized for time-triggered in-vehicle networks with data transmission rates from 1 Mbit/s up to 10 Mbit/s - Optimized electromagnetic immunity (EMI) - Very low electromagnetic emission (EME), supporting large networks and plex bus topologies - Very high level of ESD robustness, 11 k V according to IEC-61000-4-2 - Supports 60 ns minimum bit time - Optimized digital inputs to minimize jitter - Integrated Bus Guardian Interface - Bus failure protection and error detection - Automatic voltage adaptation on the digital interface pins - High current digital outputs, optimized to drive long wires and high capacitive loads - Green Product (Ro HS pliant) Potential applications - Electronic power steering - Engine control unit - Chassis domain control Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description Flex Ray is a serial, deterministic bus system for real-time control applications. It is designed for future requirements of in-vehicle control applications, providing data transmission rates up to 10 Mbit/s. Flex Ray is designed for collision-free data munication. The nodes do not arbitrate and the Flex Ray munication Controller (CC) guarantees a collision-free bus access during normal operation. Data Sheet .infineon./automotive-transceiver Rev. 1.31 2019-02-06 Flex Ray Transceiver Overview The TLE9221SX Flex Ray transceiver is a Flex Ray bus driver (BD) and it acplishes the physical interface between the munication Controller and the bus medium. Fully pliant with the Flex Ray Electrical Physical Layer Specification, version 3.0.1 (acronym EPL) and ISO 17458. The TLE9221SX supports the following functional...