TLE9461-3ES Datasheet | Infineon

Lite CAN SBC Family Overview Features Key Features - Very low quiescent current consumption in Stop- and Sleep Mode - Periodic Cyclic Wake in SBC Normal-, Stop- and Sleep Mode - Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode - Low-Drop Linear Voltage Regulator 5 V, 150 m A (250 m A peak) for main supply, - Low-Drop Linear Voltage Regulator 5 V, 100 m A, protection feature for off-board usage - High-Speed CAN transceiver supporting FD munication up to 5 Mbit/s and featuring CAN Partial Networking & CAN FD tolerant mode according to ISO 11898-2:2016 & SAE J2284 - Fully pliant to “Hardware Requirements for LIN, CAN and Flex Ray Interfaces in Automotive Applications” Revision 1.3, 2012-05-04 - Charge pump-output for N-channel MOSFET reverse-polarity protection or load switch feature with integrated spread spectrum modulation feature for optimum EMC performance - Universal High-Voltage Wake input for voltage level monitoring and wake-up detection - General Purpose High-Voltage in- and output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch - High-Voltage Measurement function as alternative pin assignment - Fail Output for Fail-Safe signalization - Configurable wake-up sources - Reset & Interrupt outputs - Configurable timeout and window watchdog - Overtemperature and short circuit protection feature - Dedicated TEST pin for SBC Development Mode entry (watchdog counter stopped) - Software patible to other SBC families TLE926x and TLE927x - Wide input voltage and temperature range - Optimized for Electromagnetic patibility (EMC) and low Electromagnetic Emission (EME) - Optimized for high immunity against Electromagnetic Interference (EMI) - AEC Qualified & Green Product (Ro HS pliant) .infineon. Rev. 1.2...