XDPL8210 Datasheet | Infineon

XDPL8210 Digital Flyback Controller IC XDP™ Digital Power Datasheet Revision 1.1 Features - Single stage flyback controller with Power Factor Correction (PFC) - Primary side regulated Constant Current (CC) output with high precision - Supports universal AC input (90 Vrms to 305 Vrms) - Supports wide LED load voltage range (up to 4 times of the minimum LED load voltage) - Excellent line and load regulation (typical within +/- 2%) - High power quality (Typical Power Factor (PF) up to 0.99 and Total Harmonic Distortion (THD) < 10%) - High efficiency with Quasi-Resonant Mode, switching in first valley (QRM1) at high output power and frequency controlled Discontinuous Conduction Mode (DCM) at medium output power - Dim-to-off operation (with typical standby power as low as 60 m W) - Dedicated PWM input pin for dimming control by either a micro-controller or a transformer-less IEC60929- pliant isolated 0 - 10 V dimming circuit (based on CDM10VD) - Dimming down to 1% - Limited Power (LP) mode - Input overvoltage and undervoltage (Brown-in/Brown-out) protection with configurable threshold for output on/off - Brown-out maximum power reduction, to better protect primary ponents from overheating and saturation - Adaptive output overvoltage protection to meet UL1310 standard (Class 2) for the 54 V LED driver design. - Output and VCC undervoltage protection - Configurable dimming parameters, e.g. dimming curve (linear/quadratic), minimum current, dim-to-off option (enabled/disabled) Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Potential applications - Electronic control gear for LED luminaires .infineon. Please read the Important Notice and Warnings at the end of this document Revision 1.1 2021-06-25 XDPL8210 Digital Flyback Controller IC XDP™ Digital Power Potential...