IP2501
IP2501 is 400mA High Efficiency Synchronous Step-up Converter manufactured by Injoinic.
Features
- Ultra low IQ, Typical Quiescent Current 1.5μA
- Ultra low Operating Input Voltage 0.9V, Wide
- Wearable Device, MID
3. Description
The IP2501 is a fixed PWM frequency, high
Input Voltage Range 0.7V-5.5V efficiency synchronous step-up converter, it
- Wide Adjustable Output Voltage Range up to provide a power supply solution for products
5.5V powered by either a one-cell, two-cell, or
- Up to 96% Efficiency three-cell alkaline, Ni Cd or Ni MH, or one-cell
- Output Voltage Accuracy ±2%
Li-ion or Li-polymer battery. At low load
- Maximum 400m A Output Current currents, the IP2501 exits the fixed switching
- Internal Synchronous Rectifier frequency mode and enter the power-down
- True Shutdown Mode mode to maintain a high efficiency over a
- Thermal Shutdown wide load current range. The IP2501 provide a
- Short Circuit Protection wide output voltage range by adjusting the
- SOT23-6 Package feedback resistor divider. During shutdown,
2. Applications the load is pletely disconnected from the battery, and the quiescent current is less than
- All One-Cell, Two-Cell, and Three-Cell Alkaline,
Ni Cd or Ni MH
- Single-Cell Li
1.5μA to ensure the battery capacity. The IP2501 is packaged in a 6-pin thin SOT23 package.
- TWS Charging Box
V1.0 1 / 14
Figure1 Simplified Application Circuit Copyright © 2020, Injoinic Corp.
4. Pin Definition
Figure1 IP2501 Pin Assignments
Pin Num
1 2 3 4 5 6
Pin Name
OUT GND EN VIN FB SW
Type
Description
PWR Boost converter output.
GND Power and logic ground.
DI Boost converter enable pin. Input high: enable; low: disable.
PWR Input supply voltage.
AI Voltage feedback for programming the output voltage.
PWR Boost and rectifying switch input, connect to...
