M660-02 Datasheet PDF - Integrated Circuit Systems DUAL SAW / SELECTABLE FREQUENCY VCSO Specs

M660-02 - DUAL SAW / SELECTABLE FREQUENCY VCSO

Datasheet Summary

Description

The M660-02 is a dual SAW, selectable frequency VCSO frequency source for low-jitter clock generation.

An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter.

Features

Two integrated SAW devices.
Selectable output frequency.
Supports multi-rate optical interface requirements.
VCSO center frequencies from 500 to 700 MHz (Specify center frequency at time of order).
Low phase jitter 0.19ps rms typical (50kHz-80MHz).
Low phase noise -70dBc/Hz @ 1kHz offset.
Differential 3.3V LVPECL output.
Single 3.3V power supply.
Small 9 x 14mm SMT (surface mount) package Sample of Available Output Frequencies VCSO Center Frequency1.

Datasheet Details

Part number	M660-02
Manufacturer	Integrated Circuit Systems
File Size	199.06 KB
Description	DUAL SAW / SELECTABLE FREQUENCY VCSO
Datasheet	M660-02 Datasheet
Additional preview pages of the M660-02 datasheet.

📁 Similar Datasheet

M66004FP - null16-DIGIT 5x7-SEGMENT VFD CONTROLLER (Mitsubishi)

M66004M6FP200D - C-MOS 7 Segments Fluorescent Display Controller (ETC)

M66004SP - null16-DIGIT 5x7-SEGMENT VFD CONTROLLER (Mitsubishi)

M66006FP - 12-BIT I/O EXPANDER (Mitsubishi)

M66006P - 12-BIT I/O EXPANDER (Mitsubishi)

M66007FP - 12-BIT INPUT EXPANDER (Mitsubishi)

M66007P - 12-BIT INPUT EXPANDER (Mitsubishi)

M66008FP - 16-BIT I/O EXPANDER (Mitsubishi)

M66008P - 16-BIT I/O EXPANDER (Mitsubishi)

M66009FP - 8-BIT I/O EXPANDER WITH 5-BIT ADDRESS (Mitsubishi)

Full PDF Text Transcription

Click to expand full text

Integrated Circuit Systems, Inc. Preliminary Information M660-02 DUAL SAW, SELECTABLE FREQUENCY VCSO PIN ASSIGNMENT (9 x 14mm SMT) nFOUT 5 2 F_SEL FOUT 4 3 GND VCC 6 1 VIN GENERAL DESCRIPTION The M660-02 is a dual SAW, selectable frequency VCSO frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M660-02 is available in a range of center frequencies from 500 to 700MHz. Minimum pull-range is ±50 ppm (wider pull-range is available).

Published: Apr 26, 2005 |