IDT74LVCHR162245A Datasheet | Integrated Device Technology

IDT74LVCHR162245A 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 16-BIT IDT74LVCHR162245A BUS TRANSCEIVER WITH 3 STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD - Typical t SK(o) (Output Skew) < 250ps - ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200p F, R = 0) - VCC = 3.3V ± 0.3V, Normal Range - VCC = 2.7V to 3.6V, Extended Range - CMOS power levels (0.4µ W typ. static) .. - All inputs, outputs, and I/O are 5V tolerant - Supports hot insertion - Available in SSOP, TSSOP, and TVSOP packages Features : DESCRIPTION: DRIVE Features : APPLICATIONS: - Balanced Output Drivers: ±12m A - Low switching noise - 5V and 3.3V mixed voltage systems - Data munication and telemunication systems This 16-bit bus transceiver is built using advanced dual metal CMOS technology. This high-speed, low power device is ideal for asynchronous munication between two buses (A and B). The Direction and Output Enable controls are designed to operate this device as either two independent 8-bit transceivers or one 16-bit transceiver. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. All inputs are designed with hysteresis for improved noise margin. All pins can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in a mixed 3.3V/5V supply system. The LVCHR162245A has series resistors in the device output structure which will significantly reduce line noise when used with light loads. The driver has been designed to drive ±12m A at the designated threshold levels. The LVCHR162245A has “bus-hold” which retains the inputs' last state whenever the input goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors. FUNCTIONAL BLOCK DIAGRAM 1DIR 1 48 24 2DIR 1OE 1A1 47 2 46 2OE 2A1 36 13 35 1B1...