EP82562GT
Key Features
- IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface IEEE 802.3u Auto-Negotiation support Digital Adaptive Equalization control Link status interrupt capability XOR tree mode support 3-port LED support (speed, link and activity) 10BASE-T auto-polarity correction LAN Connect Interface PHY detects polarity, MDI-X, and cable lengths. Auto MDI, MDIX crossover at all speeds * * * * * *
- This device is lead-free. That is, lead has not been intentionally added, but lead may still exist as an impurity at <1000 ppm. The Material Declaration Data Sheet, which includes lead impurity levels and the concentration of other Restriction on Hazardous Substances (RoHS)banned materials, is available at: ftp:// 1 In addition, this device has been tested and conforms to the same parametric specifications as previous versions of the device. For more information regarding lead-free products from Intel Corporation, contact your Intel Field Sales representative. Additional Features
- The 82562GT PLC supports drop-in replacement with the 82562ET. If it is not used as a dropin replacement, strapping options enable new operating modes: - LED support for three logic configurations. - LAN disable function using one pin. - Increased transmit strength. The receive BER performance increases the margin for cable length. Return Loss performance is improved. w w .D t a S a e h Diagnostic loopback mode 1:1 transmit transformer ratio support Low power (less than 300 mW in active transmit mode) Reduced power in “unplugged mode” (less than 50 mW) Automatic detection of “unplugged mode” 3.3 V device Lead-free1 48-pin Shrink Small Outline Package for both leaded and lead-free designs. (
