Datasheet4U Logo Datasheet4U.com

LXT334 - Quad Short Haul Transceiver

General Description

at any time, without notice.

Key Features

  • differential receiver architecture with high noise interference margin. It uses peak detection with a variable threshold for reliable recovery of data as low as 500 mV (up to 12 dB of cable attenuation). The fully digital clock recovery system uses a low frequency master clock of 2.048 MHz or 1.544 MHz as its reference. Each receiver incorporates a combination analog/digital Loss Of Signal (LOS) processor that meets the latest ITU G.775 standard. The LXT334 features a driver failure monitoring c.

📥 Download Datasheet

Datasheet Details

Part number LXT334
Manufacturer Intel
File Size 595.17 KB
Description Quad Short Haul Transceiver
Datasheet download datasheet LXT334 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LXT334 Quad Short Haul Transceiver with Clock Recovery Level One
LXT331 Dual T1/E1 Line Interface Unit Level One
LXT332 Dual T1/E1 Line Interface Unit Level One
LXT335 Quad Short Haul PCM Analog Interface Level One
LXT300 (LXT300 / LXT301) T1/E1 Integrated Short Haul Transceivers Level One Communications

Other Datasheets by Intel

Part Number Description
LXT334 Quad Short Haul Transceiver
LXT332 Dual T1/E1 Line Interface Unit
LXT3008 T1/E1/J1 N+1 Protection Interface Unit
LXT300Z (LXT300Z / LXT301Z) Advanced T1/E1 Short-Haul Transceivers
LXT301Z (LXT300Z / LXT301Z) Advanced T1/E1 Short-Haul Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LXT334 Quad Short-Haul Transceiver with Clock Recovery Datasheet The LXT334 is a quad, short-haul, PCM transceiver for 2.048 MHz or 1.544 MHz transmission systems. Its low impedance transmit output drivers provide constant line impedance whether transmitting marks or spaces. The output pulse amplitudes are also constant, stabilized against supply voltage variations. The LXT334 can be configured for balanced 100/120 Ω or unbalanced 75 Ω systems and exceeds the latest ETSI return loss recommendations. An on-chip pulse shaping circuit generates accurate transmit pulses independent of the transmit clock duty cycle. All transmitters and receivers incorporate a power down mode with output tri-stating. The LXT334 features differential receiver architecture with high noise interference margin.