Datasheet4U Logo Datasheet4U.com

IPS511G - FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH

General Description

The IPS511G/IPS512G are fully protected five terminal high side switches with built in short-circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback.

The output current is controlled when it reaches Ilim value.

Key Features

  • Over temperature protection (with auto-restart) Short-circuit protection (current limit) Active clamp E. S. D protection Status feedback Open load detection Logic ground isolated from power ground Product Summary Rds(on) V clamp I Limit V open load 150mΩ (max) 50V 5A 3V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IPS-250 Spqnnungswandler Battcenter
IPS-265 Low Cost K-Band Transceiver InnoSenT
IPS-BN0703601 LCD InferPoint
IPS-DDK Driver Development Kit Zoran Corporation
IPS031N03L N-Channel MOSFET INCHANGE

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IPS511 FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS511S FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS512G FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS521 FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS521G FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet No.PD60156-K IPS511G/IPS512G FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH Features • • • • • • • Over temperature protection (with auto-restart) Short-circuit protection (current limit) Active clamp E.S.D protection Status feedback Open load detection Logic ground isolated from power ground Product Summary Rds(on) V clamp I Limit V open load 150mΩ (max) 50V 5A 3V Description The IPS511G/IPS512G are fully protected five terminal high side switches with built in short-circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches Ilim value. The current limitation is activated until the thermal protection acts.