Datasheet4U Logo Datasheet4U.com

IR3310 - PROGRAMMABLE CURRENT SENSING HIGH SIDE SWITCH

General Description

The IR 3310(S) is a Fully Protected 4 terminal high side switch.

The input signal is referenced to Vcc.

When the input voltage Vcc - Vin is higher than the specified Vih threshold, the output power MOSFET is turned-on.

Key Features

  • Load current feedback Programmable over current shutdown Active clamp E. S. D protection Input referenced to Vcc Over temperatue shutdown Reverse battery protection Product Summary Rds(on) Vcc. op. Current ratio Ishutdown Active clamp Load Dump Package 7mΩ max. 6 to 28V 8800 10 to 100A 35V 40V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IR3300 SERVICE HANDBOOK Canon
iR3300 Copying Guide Canon
IR333 Infrared Emitting Diodes Everlight Electronics
IR333-A 5mm Infrared LED Everlight Electronics
IR333C-6-A 5mm Infrared LED Everlight Electronics

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR3312 PROGRAMMABLE CURRENT SENSING HIGH SIDE SWITCH
IR3313PBF PROGRAMMABLE CURRENT SENSE HIGH SIDE SWITCH
IR3313S PROGRAMMABLE CURRENT SENSE HIGH SIDE SWITCH
IR3314PBF Programmable Current Sense High Side Switch
IR3314SPBF Programmable Current Sense High Side Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet No.PD60181 Rev.E IR3310(S) PROGRAMMABLE CURRENT SENSING HIGH SIDE SWITCH Features • • • • • • • Load current feedback Programmable over current shutdown Active clamp E.S.D protection Input referenced to Vcc Over temperatue shutdown Reverse battery protection Product Summary Rds(on) Vcc.op. Current ratio Ishutdown Active clamp Load Dump Package 7mΩ max. 6 to 28V 8800 10 to 100A 35V 40V Description The IR 3310(S) is a Fully Protected 4 terminal high side switch. The input signal is referenced to Vcc. When the input voltage Vcc - Vin is higher than the specified Vih threshold, the output power MOSFET is turned-on. When Vcc - Vin is lower than the specified Vil threshold, the output MOSFET is turned-off.