IRS2132 Datasheet | International Rectifier

Features - - - - - - - - - - - - Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, d V/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout for all channels Over-current shutdown turns off all six drivers Three Independent half-bridge drivers Matched propagation delay for all channels 2.5 V logic patible Outputs out of phase with inputs Cross-conduction prevention logic All parts are LEAD-FREE Product Summary VOFFSET IO+/- (min.) VOUT ton/off (typ.) Deadtime (typ.) 600 V max. 200 m A / 420 m A 10 V - 20 V (IRS213(0,2)) 13 V - 20 V (IRS21303) 500 ns 2.0 µs (IRS2130) 0.7 µs (IRS213(2,03)) Applications: - Motor Control - Air Conditioners/ Washing Machines - General Purpose Inverters - Micro/Mini Inverter Drives Description Packages The IRS213(0, 03, 2) are high voltage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are patible with CMOS or LSTTL outputs, down to 2.5 V logic. A ground-referenced operational amplifier provides analog feedback of bridge 28-Lead SOIC 28-Lead PDIP current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor. An open drain FAULT signal indicates if an over-current or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The 44-Lead PLCC w/o 12 Leads floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 V. Typical Connection .irf. IRS2130/IRS21303/IRS2132 (J&S)Pb F PRELIMINARY Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All...