IRSM808-105MH Datasheet | International Rectifier

Description IRSM808-105MH is a 10A, 500V half-bridge module designed for advanced appliance motor drive applications such as energy efficient fans and pumps. IR's technology offers an extremely pact, high performance half-bridge topology in an isolated package. This advanced IPM offers a bination of IR's low RDS(on) Trench FREDFET technology and the industry benchmark half-bridge high voltage, rugged driver in a small PQFN package. At only 8x9mm and featuring integrated bootstrap functionality, the pact footprint of this surface-mount package makes it suitable for applications that are space-constrained. IRSM808-105MH functions without a heat sink. Features - Integrated gate drivers and bootstrap functionality - Suitable for sinusoidal modulation applications - Low RDS(on) Trench FREDFET - Under-voltage lockout for both channels - Matched propagation delay for all channels - Optimized d V/dt for loss and EMI trade offs - 3.3V input logic patible - Active high HIN and active low LIN - Motor Power range 80-200W - Isolation 1500VRMS min - ROHS pliant Internal Electrical Schematic IRSM808-105MH V+ VCC HIN LIN DT Ordering Information Orderable Part Number IRSM808-105MH IRSM808-105MHTR 600V Half Bridge driver with built in bootstrap Package Type PQFN 8x9mm PQFN 8x9mm Vs V- Form Tray Tape and Reel Quantity 1300 2000 1 .irf. © 2014 International Rectifier Submit Datasheet Feedback May 18, 2014 Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the module may occur. These are not tested at manufacturing. All voltage parameters are absolute voltages referenced to VSS unless otherwise stated in the table. The thermal resistance rating is measured under board mounted and still air conditions. Symbol Description Min Max BVDSS MOSFET Blocking Voltage --- Output DC Current per MOSFET @...