Datasheet4U Logo Datasheet4U.com

IP103H - Voltage and Current Controller

General Description

The IP103H is designed to be used in battery chargers with a constant voltage and a constant current control.

This device is a monolithic IC that includes one independent op-amp and other op-amp for which the non inverting input is wired to a 2.5V fixed Voltage reference.

Key Features

  • Operational Amplifiers - Low Supply Current : 200uA/amp - Medium Speed : 1.5MHz - Low Level Output Voltage Close to VEE : 0.1V Typ. -Wide Power Supply Range; 3.6~28V Adjustable Shunt Regulator - Fixed Output Voltage Reference 2.5V - Sink Current Capability : 0.5 to 150mA - 1% Voltage Precision - Latch-up Immunity.

📥 Download Datasheet

Datasheet Details

Part number IP103H
Manufacturer Interpion semiconductor
File Size 265.49 KB
Description Voltage and Current Controller
Datasheet download datasheet IP103H Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IP1000ALF Gigabit Ethernet NIC Single Chip IC Plus
IP1001 Full Function Synchronous Buck Power Block International Rectifier
IP1001LF Integrated 10/100/1000 Gigabit Ethernet Transceiver IC Plus
IP100ALF Integrated 10/100 Ethernet MAC PHY IC Plus
IP101A Single port 10/100 Fast Ethernet Transceiver IC Plus

Other Datasheets by Interpion semiconductor

Part Number Description
IP1117 LDO Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IP103H Voltage and Current Controller * The Main Differences of IP103 and IP103H are Vicm(Input Common Mode Voltage Range) and Vop(Operating Voltage) www.datasheet4u.com DESCRIPTION The IP103H is designed to be used in battery chargers with a constant voltage and a constant current control. This device is a monolithic IC that includes one independent op-amp and other op-amp for which the non inverting input is wired to a 2.5V fixed Voltage reference. Integrating the reference and op-amps creates a solution for low cost charging applications. 8DIP 8SOP FEATURES Operational Amplifiers - Low Supply Current : 200uA/amp - Medium Speed : 1.5MHz - Low Level Output Voltage Close to VEE : 0.1V Typ. -Wide Power Supply Range; 3.6~28V Adjustable Shunt Regulator - Fixed Output Voltage Reference 2.