Datasheet4U Logo Datasheet4U.com

82C84A - CMOS Clock Generator Driver

General Description

ADDRESS ENABLE: AEN is an active LOW signal.

Signal (RDY1 or RDY2).

AEN1 validates RDY1 while AEN2 validates RDY2.

Key Features

  • Generates the System Clock For CMOS or NMOS Microprocessors.
  • Up to 25MHz Operation.
  • Uses a Parallel Mode Crystal Circuit or External Frequency Source.
  • Provides Ready Synchronization.
  • Generates System Reset Output From Schmitt Trigger Input.
  • TTL Compatible Inputs/Outputs.
  • Very Low Power Consumption.
  • Single 5V Power Supply.
  • Operating Temperature Ranges - C82C84A.
  • 0°C to +70.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
82C84A CMOS Clock Generator Driver Renesas
82C802G System / Power Management Controller Opti
82C802GP System / Power Management Controller Opti
82C814 Docking Station Controller Preliminary Data Book Opti
82C82 CMOS Octal Latching Bus Driver Renesas

Other Datasheets by Intersil (now Renesas)

Part Number Description
82C82 CMOS Octal Latching Bus Driver
82C83H CMOS Octal Latching Inverting Bus Driver
82C85 CMOS Static Clock Controller/Generator
82C86H CMOS Octal Bus Transceiver
82C87H CMOS Octal Inverting Bus Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® Data Sheet December 6, 2005 82C84A FN2974.3 CMOS Clock Generator Driver The Intersil 82C84A is a high performance CMOS Clock Generator-driver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C86, 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-by-three counter and complete “Ready” synchronization and reset logic. Static CMOS circuit design permits operation with an external frequency source from DC to 25MHz. Crystal controlled operation to 25MHz is guaranteed with the use of a parallel, fundamental mode crystal and two small load capacitors. All inputs (except X1 and RES) are TTL compatible over temperature and voltage ranges.