Datasheet4U Logo Datasheet4U.com

8502A - ISL8502A

General Description

” beginning on page 13 for pin descriptions.

PART NUMBER (Note 2) ISL8502AIRZ (Notes 1, 3) ISL8502AEVAL1Z NOTES: 1.

” suffix for tape and reel.

Please refer to TB347 for details on reel specifications.

2.

Key Features

  • a bi-directional Enable pin that allows the part to pull the enable pin low during fault detection. PGOOD delay for ISL8502A has been decreased to 1ms typical (at 500kHz switching frequency) compared to 250ms (at 500kHz) for ISL8502. Features.
  • Up to 2A Continuous Output Current.
  • Integrated MOSFETs for Small Regulator Footprint.
  • Adjustable Switching Frequency, 500kHz to 1.2MHz.
  • Tight Output Voltage Regulation, ±1% Over-temperature.
  • Wide Input Voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
85015013A CMOS Serial Controller Interface Renesas
8507 4mA COMPANDER UTC
8508701ZX 0.1 Amp Power Operational Amplifier Elantec Semiconductor
8508801YX 1 Amp Power Operational Amplifier Elantec Semiconductor
850S1201 12:1 Single-ended Multiplexer IDT

Other Datasheets by Intersil (Renesas)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
2A Synchronous Buck Regulator with Integrated MOSFETs ISL8502A The ISL8502A is a synchronous buck controller with internal MOSFETs packaged in a small 4mmx4mm QFN package. The ISL8502A can support a continuous load of 2A and has a very wide input voltage range. With the switching MOSFETs integrated into the IC, the complete regulator footprint can be very small and provide a much more efficient solution than a linear regulator. The ISL8502A is capable of stand-alone operation or it can be used in a master slave combination for multiple outputs that are derived from the same input rail. Multiple slave channels (up to six) can be synchronized. This method minimizes the EMI and beat frequencies effect with multi-channel operation.