Datasheet4U Logo Datasheet4U.com

ACS138MS - Radiation Hardened 3-to-8 Line Decoder/Demultiplexer

General Description

The Radiation Hardened ACS138MS is an Inverting 3-to-8 Line Decoder/Demultiplexer with three binary select inputs (A0, A1 and A2).

If the device is enabled, these inputs determine which one of the eight normally high outputs will go low.

Key Features

  • QML Qualified Per MIL-PRF-38535 Requirements.
  • 1.25Micron Radiation Hardened SOS CMOS.
  • Radiation Environment - Latch-up Free Under any Conditions - Total Dose.
  • . . 3 x 105 RAD(Si) - SEU Immunity.
  • . 100MeV/(mg/cm2).
  • Input Logic Levels . . . VIL = (0.3V)(VCC), VIH = (0.7V)(VCC).
  • Output Current.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACS101A Acapella Optical Modem Semtech Corporation
ACS102-5T1 AC LINE SWITCH STMicroelectronics
ACS102-5TA AC LINE SWITCH STMicroelectronics
ACS102-6T Transient protected AC switch STMicroelectronics
ACS102A ACS102A Fiber Modem Semtech Corporation

Other Datasheets by Intersil (now Renesas)

Part Number Description
ACS132MS Radiation Hardened Quad 2-Input NAND Schmitt Trigger
ACS139MS Radiation Hardened Dual 2-to-4 Line Decoder/Demultiplexer
ACS109MS Radiation Hardened Dual J-K Flip-Flop
ACS10MS Radiation Hardened Triple Three-Input NAND Gate
ACS112MS Radiation Hardened Dual J-K Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACS138MS December 1997 Radiation Hardened 3-to-8 Line Decoder/Demultiplexer Description The Radiation Hardened ACS138MS is an Inverting 3-to-8 Line Decoder/Demultiplexer with three binary select inputs (A0, A1 and A2). If the device is enabled, these inputs determine which one of the eight normally high outputs will go low. Two active low and one active high enable inputs (E1, E2 and E3) are provided to make cascaded decoder designs easier to implement. The ACS138MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment. These devices offer significant power reduction and faster performance when compared to ALSTTL types.