Datasheet4U Logo Datasheet4U.com

CD4016BMS - CMOS Quad Bilateral Switch

General Description

CD4016BMS Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals.

Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.

Key Features

  • Transmission or Multiplexing of Analog or Digital Signals.
  • High Voltage Type (20V Rating).
  • 20V Digital or ±10V Peak-to-Peak Switching.
  • 280Ω Typical On-State Resistance for 15V Operation.
  • Switch On-State Resistance Matched to Within 10Ω Typ. Over 15V Signal Input Range.
  • High On/Off Output Voltage Ratio: 65dB Typ. at FIS = 10kHz, RL = 10kΩ.
  • High Degree of Linearity:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CD4016BM Quad Bilateral Switch National Semiconductor
CD4016BM CMOS Quad Bilateral Switch Texas Instruments
CD4016B CMOS Quad Bilateral Switch Texas Instruments
CD4016B CMOS Quad Bilateral Switch RCA
CD4016BC Quad Bilateral Switch National Semiconductor

Other Datasheets by Intersil (now Renesas)

Part Number Description
CD40160BMS CMOS Synchronous Programmable 4-Bit Counters
CD40161BMS CMOS Synchronous Programmable 4-Bit Counters
CD40162BMS CMOS Synchronous Programmable 4-Bit Counters
CD40163BMS CMOS Synchronous Programmable 4-Bit Counters
CD40100BMS CMOS 32-Stage Static Left/Right Shift Register

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CD4016BMS November 1994 CMOS Quad Bilateral Switch Applications • Analog Signal Switching/Multiplexing • Signal Gating • Squelch Control • Chopper • Modulator • Demodulator • Commutating Switch • Digital Signal Switching/Multiplexing • CMOS Logic Implementation • Analog to Digital & Digital to Analog Conversion • Digital Control of Frequency, Impedance, Phase, and Analog Signal Gain Features • Transmission or Multiplexing of Analog or Digital Signals • High Voltage Type (20V Rating) • 20V Digital or ±10V Peak-to-Peak Switching • 280Ω Typical On-State Resistance for 15V Operation • Switch On-State Resistance Matched to Within 10Ω Typ. Over 15V Signal Input Range • High On/Off Output Voltage Ratio: 65dB Typ. at FIS = 10kHz, RL = 10kΩ • High Degree of Linearity: <0.5% Distortion Typ.