Datasheet4U Logo Datasheet4U.com

EL5027 - Rail-to-Rail Input-Output Buffer

General Description

CONDITION POWER SUPPLY IS IS_DIS VLR VHR VH-VL INPUT Supply Current Supply Current - Disabled VL Range VH Range Maximum VH - VL Range EN = 3V, INX = 0V EN = 3V, INX = 3V EN = 0V, INX = 0V VIH IIH VIL IIL CIN RIN OUTPUT Logic ‘1’ Input Voltage Logic ‘1’ Input Current Logic ‘0’ Input Voltage Lo

Key Features

  • SIx inverting/non-inverting channels.
  • 3.3V input logic.
  • 18V output.
  • 250µA typical supply current.
  • Drives up to 500pF.
  • TR/TF = 35ns max.
  • Disable function.
  • 20-pin QFN (4mm x 4mm) and HTSSOP packages.
  • Pb-free available (RoHS compliant).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EL502 Pentode MAZDABELVU
EL50 Pentode ETC
EL50 High Power Output Pentode ETC
EL50 Amplifier ETC
EL50 Output Pentode Philips

Other Datasheets by Intersil (now Renesas)

Part Number Description
EL5000A High Voltage TFT-LCD Logic Driver
EL5001 6-Channel Clock Driver
EL5100 200MHz Slew Enhanced VFA
EL5101 200MHz Slew Enhanced VFA
EL5102 Slew Enhanced VFAs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® Data Sheet January 31, 2005 EL5001 FN7376.2 6-Channel Clock Driver The EL5001 is a 6-channel level shifting driver designed primarily for use as a clock driver in LTPS LCD displays. The EL5001 buffers and level shifts six logic level input signals. The six channels are grouped in to two sets, one of two channels and one of four channels. Each set can be configured in the inverting or non-inverting modes. Operating from 3.3V input logic, the output swing is set using two reference input pins. These pins can be up to 18V differential and are not buffered, so should therefore be bypassed effectively. The EL5001 is designed to drive capacitive loads of 500pF with rise and fall times of just 20ns. A three-state pin is provided to set all outputs in to a high impedance mode.