Datasheet4U Logo Datasheet4U.com

EL5325 - 12-Channel TFT-LCD Reference Voltage Generator

General Description

CONDITIONS MIN TYP MAX UNIT No load 10.2 0.17 12.5 0.35 mA mA Digital Supply Current Output Swing Low Output Swing High Short Circuit Current Power Supply Rejection Ratio Program to Out Delay Accuracy referred to the ideal value Channel to Channel Mismatch Droop Voltage Input Resistance @ VREF

Key Features

  • 12-channel reference outputs.
  • Accuracy of ±1%.
  • Supply voltage of 5V to 16.5V.
  • Digital supply 3.3V to 5V.
  • Low supply current of 10mA.
  • Rail-to-rail capability.
  • Internal thermal protection.
  • Pb-Free Available.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EL5325A 12-Channel TFT-LCD Reference Voltage Generator Renesas
EL5323 Rail-to-Rail Input-Output Buffers Intersil
EL5324 12MHz Rail-to-Rail Buffer/Amplifier Renesas
EL5326 TFT-LCD Reference Voltage Generator Renesas
EL5327 Rail-toRail Buffers Intersil

Other Datasheets by Intersil (now Renesas)

Part Number Description
EL5300 200MHz Slew Enhanced VFA
EL5302 Slew Enhanced VFAs
EL5367 1GHz Triple Current Feedback Amplifier
EL5392A Triple 600MHz Current Feedback Amplifier
EL5000A High Voltage TFT-LCD Logic Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® EL5325 Data Sheet March 5, 2004 FN7437.1 12-Channel TFT-LCD Reference Voltage Generator The EL5325 is designed to produce the reference voltages required in TFT-LCD applications. Each output is programmed to the required voltage with 10 bits of resolution. Reference pins determine the high and low voltages of the output range, which are capable of swinging to either supply rail. Programming of each output is performed using the 3-wire, SPI compatible interface. A number of EL5325 can be stacked for applications requiring more than 12 outputs. The reference inputs can be tied to the rails, enabling each part to output the full voltage range, or alternatively, they can be connected to external resistors to split the output range and enable finer resolutions of the outputs.