Datasheet4U Logo Datasheet4U.com

HA1-5320-2 - 1 Microsecond Precision Sample and Hold Amplifier

Datasheet Summary

Features

  • Gain, DC.
  • . . . . 2 x 106 V/V.
  • Acquisition Time.
  • . 1.0µs (0.01%).
  • Droop Rate.
  • . . 0.08µV/µs (25oC) 17µV/µs (Full Temperature).
  • Aperture Time.
  • . . . . 25ns.
  • Hold Step Error (See Glossary).
  • . . 5mV.
  • Internal Hold Capacitor.
  • Fully Differential Input.

📥 Download Datasheet

Datasheet preview – HA1-5320-2

Datasheet Details

Part number HA1-5320-2
Manufacturer Intersil Corporation
File Size 85.86 KB
Description 1 Microsecond Precision Sample and Hold Amplifier
Datasheet download datasheet HA1-5320-2 Datasheet
Additional preview pages of the HA1-5320-2 datasheet.

📁 Similar Datasheet

  • HA10 - Current Transducer 5/10a (LEM)
  • HA1099 - 18-pin Flash microcontroller Introduction (Microchip)
  • HA11 - 1.0 AMP.HIGH EFFICIENCY RECTIFIERS (Jinan Gude Electronic Device)
  • HA11122W - Amplifier System (Hitachi)
  • HA11211 - FM / AM Stereo Receiver System (Hitachi)
  • HA11215A - Color TV Picture IF System (Renesas Technology)
  • HA11215A - COLOR TV PICTURE IF SYSTEM (Hitachi Semiconductor)
  • HA11219 - Noise Suppressor System (Hitachi)
  • HA11221 - B/W TV Picture IF Amplifier (Hitachi Semiconductor)
  • HA11223 - PLL FM Stereo Demodulator (Hitachi)
Other Datasheets by Intersil Corporation
  • HA1-5320-5 - 1 Microsecond Precision Sample and Hold Amplifier
  • HA1-5320883 - High Speed Precision Sample and Hold Amplifier
  • HA1-5330-2 - 650ns Precision Sample and Hold Amplifier
  • HA1-5330-5 - 650ns Precision Sample and Hold Amplifier
  • HA1-5340883 - High Speed/ Low Distortion/ Precision Monolithic Sample and Hold Amplifier
  • HA1-5004-5 - 100MHz Current Feedback Amplifier
  • HA1-5104-2 - Dual and Quad/ 8MHz and 60MHz/ Low Noise Operational Amplifiers
  • HA1-5104-5 - Dual and Quad/ 8MHz and 60MHz/ Low Noise Operational Amplifiers

Full PDF Text Transcription

Click to expand full text
HA-5320 Data Sheet April 1999 File Number 2857.4 1 Microsecond Precision Sample and Hold Amplifier The HA-5320 was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier capable of providing large amounts of charging current, a low leakage analog switch, and an output integrating amplifier. The analog switch sees virtual ground as its load; therefore, charge injection on the hold capacitor is constant over the entire input/output voltage range. The pedestal voltage resulting from this charge injection can be adjusted to zero by use of the offset adjust inputs. The device includes a hold capacitor.
Published: |