Datasheet4U Logo Datasheet4U.com

HCA10008 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver

General Description

PIN NUMBER 1 SYMBOL BHB DESCRIPTION B High-side Bootstrap supply.

External bootstrap diode and capacitor are required.

Connect cathode of bootstrap diode and positive side of bootstrap capacitor to this pin.

Key Features

  • Independently Drives 4 N-Channel FET in Half Bridge or Full Bridge Configurations.
  • Bootstrap Supply Max Voltage to 95VDC.
  • Drives 1000pF Load at 1MHz in Free Air at 50oC with Rise and Fall Times of Typically 10ns.
  • User Programmable Dead Time.
  • On-Chip Charge Pump and Bootstrap Upper Bias Supplies.
  • DIS (Disable) Overrides Input Control.
  • Input Logic Thresholds Compatible with 5V to 15V Logic Levels.
  • Very Low Power Consumption.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HCA0207 Carbon Film Resistors Vishay
HCA60R040F 600V N-Channel Super Junction MOSFET SemiHow
HCA60R070F 600V N-Channel Super Junction MOSFET SemiHow
HCA60R095T 600V N-Channel Super Junction MOSFET SemiHow
HCA60R099F 600V N-Channel Super Junction MOSFET SemiHow

Other Datasheets by Intersil (now Renesas)

Part Number Description
HCA10009 100MHz/ Single and Dual Low Noise/ Precision Operational Amplifier
HCA10014 15MHz/ BiMOS Operational Amplifier with MOSFET Input/CMOS Output
HCA125ACREF 125/220 Watt Full Bandwidth Class D Amplifier
HCA600ACREF 600W/1000W Full Bandwidth Class D Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HCA10008 Data Sheet August 1999 File Number 4772 80V/2.5A Peak, High Frequency Full Bridge FET Driver The HCA10008 is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC package. The HCA10008 can drive every possible switch combination except those which would cause a shoot through condition. The HCA10008 can switch at frequencies up to 1MHz and is well suited to driving Voice Coil Motors, high-frequency Class D audio amplifiers, and power supplies. For example, the HCA10008 can drive medium voltage brush motors, and two HCA10008s can be used to drive high performance stepper motors, since the short minimum “on-time” can provide fine micro-stepping capability.