HI-674A Datasheet | Intersil

HI-574A, HI-674A, HI-774 August 1997 plete, 12-Bit A/D Converters with Microprocessor Interface Description The HI-X74(A) is a plete 12-bit, Analog-to-Digital Converter, including a +10V reference clock, three-state outputs and a digital interface for microprocessor control. Successive approximation conversion is performed by two monolithic dice housed in a 28 lead package. The bipolar analog die Features the Intersil Dielectric Isolation process, which provides enhanced AC performance and freedom from latch-up. Custom design of each IC (bipolar analog and CMOS digital) has yielded improved performance over existing versions of this converter. The voltage parator Features high PSRR plus a high speed current-mode latch, and provides precise decisions down to 0.1 LSB of input overdrive. More than 2X reduction in noise has been achieved by using current instead of voltage for transmission of all signals between the analog and digital ICs. Also, the clock oscillator is current controlled for excellent stability over temperature. The HI-X74(A) offers standard unipolar and bipolar input ranges, laser trimmed for specified linearity, gain and offset accuracy. The low noise buried zener reference circuit is trimmed for minimum temperature coefficient. Power requirements are +5V and ±12V to ±15V, with typical dissipation of 385mW (HI-574A/674A) and 390mW (HI-774) at 12V. All models are available in sidebrazed DIP, PDIP , and CLCC. For additional HI-Rel screening including 160 hour burnin, specify “-8” suffix. For MIL-STD-883 pliant parts, request HI-574A/883, HI-674A/883, and HI-774/883 data sheets. Features - plete 12-Bit A/D Converter with Reference and Clock - Full 8-Bit, 12-Bit or 16-Bit Microprocessor Bus Interface - Bus Access Time - - . . ....