HIN211E Datasheet | Intersil

feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The HIN205E and HIN235E require no external capacitors and are ideally suited for applications where circuit board space is critical. The family of devices offers a wide variety of high-speed RS-232 transmitter/receiver binations to acmodate various applications (see Selection Table). The HIN205E, HIN206E, HIN211E, HIN213E, HIN235E, HIN236E, and HIN241E feature a low power shutdown mode to conserve energy in battery powered applications. In addition, the HIN213E provides two active receivers in shutdown mode allowing for easy “wakeup” capability. The drivers feature true TTL/CMOS input patibility, slew rate-limited output, and 300Ω power-off source impedance. The receivers can handle up to ±30V input, and have a 3kΩ to 7kΩ input impedance. The receivers also feature hysteresis to greatly improve noise rejection. Features - High Speed ISDN patible - - . . . 230kbits/s - ESD Protection for RS-232 I/O Pins to ±15k V (IEC1000) - Meets All RS-232E and V.28 Specifications - Requires Only 0.1µF or Greater External Capacitors HIN205E and HIN235E Require No External Capacitors) - Two Receivers Active in Shutdown Mode (HIN213E) - Requires Only Single +5V Power Supply - Onboard Voltage Doubler/Inverter - Low Power Consumption (Typ)- - - . . . 5m A - Low Power Shutdown Function (Typ) - - . . . 1µA - Three-State TTL/CMOS Receiver Outputs - Multiple Drivers - ±10V Output Swing for +5V Input - 300Ω Power-Off Source Impedance - Output Current Limiting - TTL/CMOS patible - Multiple Receivers - ±30V Input Voltage Range - 3kΩ to 7kΩ Input Impedance - 0.5V Hysteresis to Improve Noise Rejection Applications - Any System Requiring High-Speed RS-232 munications Port - puter - Portable, Mainframe, Laptop - Peripheral - Printers and Terminals - Instrumentation, UPS - Modems, ISDN Terminal Adaptors Selection Table PART NUMBER...