Datasheet4U Logo Datasheet4U.com

HIP5016 - 7V/ 7A SynchroFET Complementary Drive Synchronous Half-Bridge

General Description

SYMBOL VCC VIN PHASE PWM (HIP5015) PWM (HIP5016) GND DESCRIPTION Positive supply to control logic and gate drivers.

De-couple this pin to GND.

FET Switch Input Voltage.

Key Features

  • ensure easy start-up. First, the supply currents stay below specification as the supply voltages ramp up; no unexpected surges occur that might perturb a soft-start or deplete a charge-pump. Second, any power-up sequence of the VCC, VIN, or PWM pins can be used without causing large currents. Third, the chip operates when VCC is greater than 2V so VCC can be created from a charge pump powered from VIN. Features.
  • Complementary Drive, Half-Bridge Power NMOS.
  • Use With Low-Cost Si.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP5600 Thermally Protected High Voltage Linear Regulator Harris Corporation
HIP0045 1A/50V Octal Low Side Power Driver Renesas
HIP0050 0.3A/50V Octal Low Side Power Driver Renesas
HIP0051 0.25A/50V Octal Low Side Power Driver Renesas
HIP0060 50V Quad Low Side Power Driver Renesas

Other Datasheets by Intersil (now Renesas)

Part Number Description
HIP5010 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
HIP5011 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
HIP5015 7V/ 7A SynchroFET Complementary Drive Synchronous Half-Bridge
HIP5020 Integrated-Power Buck Converter Controller with Synchronous Rectification
HIP5060 Power Control IC Single Chip PowerSupply

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HIP5015, HIP5016 Data Sheet June 1996 File Number 4142 7V, 7A SynchroFET™ Complementary Drive Synchronous Half-Bridge Designed with the Pentium® in mind, the Intersil SynchroFET family provides a new approach for implementing a synchronous rectified buck switching regulator. The SynchroFET™ replaces two power DMOSs, a Schottky diode, two gate drivers and synchronous control circuitry. The complementary drive circuit turns the upper FET on and the lower FET off when the input from the PWM is high. When the input from the PWM goes low the upper FET turns off and the lower FET turns on. The HIP5016 has a PWM pin that inverts the relationship from the input to PHASE.