Datasheet4U Logo Datasheet4U.com

HS-0508RH - Radiation Hardened Single 8/Differential 4-Channel CMOS Analog Multiplexers

General Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Key Features

  • Electrically Screened to SMD # 5962-95692.
  • QML Qualified per MIL-PRF-38535 Requirements.
  • Gamma Dose.
  • . . 1 x 104RAD(Si).
  • No Latch-Up.
  • No Channel Interaction During Overvoltage.
  • Low On Resistance.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS-100B A Highly Integrated USB Audio C-Media
HS-100C A Highly Integrated USB Audio C-Media
HS-101 Reflective sensors KODENSHI KOREA CORP
HS-101S Reflective sensors KODENSHI KOREA CORP
HS-117EH Radiation Hardened Adjustable Positive Voltage Regulator Intersil

Other Datasheets by Intersil (now Renesas)

Part Number Description
HS-0509RH Radiation Hardened Single 8/Differential 4-Channel CMOS Analog Multiplexers
HS-0546RH Radiation Hardened Single 16/Differential 8 Channel CMOS Analog Multiplexers with Active Overvoltage Protection
HS-0547RH Radiation Hardened Single 16/Differential 8 Channel CMOS Analog Multiplexers with Active Overvoltage Protection
HS-0548RH Radiation Hardened Single 8/Differential 4 Channel CMOS Analog Multiplexers
HS-0549RH Radiation Hardened Single 8/Differential 4 Channel CMOS Analog Multiplexers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HS-0508RH, HS-0509RH Data Sheet August 1999 File Number 3977.2 Radiation Hardened Single 8/Differential 4-Channel CMOS Analog Multiplexers These radiation hardened monolithic CMOS multiplexers each include an array of eight analog switches, a digital decode circuit for channel selection, a voltage reference for logic thresholds, and an ENABLE input for device selection when several multiplexers are present. The Dielectric Isolation (DI) process used in fabrication of these devices eliminates the problem of latch-up. Also, DI offers much lower substrate leakage and parasitic capacitance than conventional junction-isolated CMOS. Switches are guaranteed to break-before-make, so that two channels are never shorted together.