Datasheet4U Logo Datasheet4U.com

HS-2100RH - Radiation Hardened High Frequency Half Bridge Driver

General Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Key Features

  • Electrically Screened to DESC SMD # 5962-99536.
  • QML Qualified per MIL-PRF-38535 Requirements.
  • Radiation Environment - Maximum Total Dose.
  • . . . . 3 x 105 RAD(SI) - DI RSG Process Provides Latch-up Immunity - Vertical Architecture Provides Low Dose Rate Immunity.
  • Bootstrap Supply Max Voltage to 120V.
  • Drives 1000pF Load at 1MHz with Rise and Fall Times of 45ns (Typ).
  • 1A (Typ) Peak Output Current.
  • Independent Inputs for.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS-201HSEH BiCMOS Analog Switch Intersil
HS-23101A Display XDL
HS-23101B Display XDL
HS-2600 Crystal Clock Oscillators NEL
HS-26C31EH Radiation Hardened Quad Differential Line Driver Intersil

Other Datasheets by Intersil (now Renesas)

Part Number Description
HS-201HSRH BiCMOS Analog Switch
HS-22620RH Rad Hard Dual/ Wideband/ High Input Impedance Uncompensated Operational Amplifier
HS-2400RH Radiation Hardened PRAM Four Channel Programmable Operational Amplifier
HS-2420EH Radiation Hardened Fast Sample and Hold
HS-2420RH Radiation Hardened Fast Sample and Hold

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HS-2100RH Data Sheet June 1999 File Number 4562.3 Radiation Hardened High Frequency Half Bridge Driver The Radiation Hardened HS-2100RH is a high frequency, 100V Half Bridge N-Channel MOSFET Driver IC, which is a functional, pin-to-pin replacement for the Intersil HIP2500 and the industry standard 2110 types. The low-side and high-side gate drivers are independently controlled. This gives the user maximum flexibility in dead-time selection and driver protocol. In addition, the device has on-chip error detection and correction circuitry, which monitors the state of the high-side latch and compares it to the HIN signal. If they disagree, a set or reset pulse is generated to correct the high-side latch. This feature protects the high-side latch from SEUs.