Datasheet4U Logo Datasheet4U.com

HS0-1825ARH - Dual Output PWM

Description

only.

Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Features

  • include a precision voltage reference, low power start-up circuit, high frequency oscillator, wide-band error amplifier, and fast current-limit comparator. The use of proprietary process capabilities and unique design techniques results in fast propagation delay times and high output current over a wide range of output voltages. Constructed with the Intersil Rad Hard Silicon Gate (RSG) Dielectric Isolation BiCMOS process, the HS-1825ARH has been specifically designed to provide highly reliable p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS00-00041 10Base Networking Products ETC
HS00-000444 10Base Networking Products ETC
HS00-00078 10Base Networking Products ETC
HS00-000914 T1/CEPT/ISDN-Pri Telecom Products Bi technologies
HS00-000994 10Base Networking Products ETC

Other Datasheets by Intersil (Renesas)

Part Number Description
HS0-1840ARH-Q Rad-Hard 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection
HS0-0546RH-Q Radiation Hardened Single 16/Differential 8 Channel CMOS Analog Multiplexers with Active Overvoltage Protection
HS0-0547RH-Q Radiation Hardened Single 16/Differential 8 Channel CMOS Analog Multiplexers with Active Overvoltage Protection
HS0-201HSRH-Q Radiation Hardened High Speed/ Quad SPST/ CMOS Analog Switch
HS0-22620RH-Q Rad Hard Dual/ Wideband/ High Input Impedance Uncompensated Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® HS-1825ARH Data Sheet September 25, 2008 FN4561.8 Radiation Hardened High-Speed, Dual Output PWM The Radiation Hardened HS-1825ARH Pulse Width Modulator is designed to be used in high frequency switched-mode power supplies and can be used in either current-mode or voltage-mode. It is well suited for single-ended boost converter applications. Device features include a precision voltage reference, low power start-up circuit, high frequency oscillator, wide-band error amplifier, and fast current-limit comparator. The use of proprietary process capabilities and unique design techniques results in fast propagation delay times and high output current over a wide range of output voltages.
Published: |