Datasheet4U Logo Datasheet4U.com

HS0-26C31RH-Q Datasheet Radiation Hardened Quad Differential Line Driver

Manufacturer: Intersil (now Renesas)

Overview: HS-26C31RH Data Sheet August 1999 File Number 3401.3 Radiation Hardened Quad Differential Line Driver The Intersil HS-26C31RH is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26C31RH accepts CMOS signal levels and converts them to RS-422 patible outputs. This circuit uses special outputs that enable the drivers to power down without loading down the bus. Enable and disable pins allow several devices to be connected to the same data source and addressed independently. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-96663. A “hot-link” is provided on our homepage for downloading. http://.intersil./spacedefense/space.

Key Features

  • Electrically Screened to SMD # 5962-96663.
  • QML Qualified per MIL-PRF-38535 Requirements.
  • 1.2 Micron Radiation Hardened CMOS - Total Dose Up to.
  • 300kRAD(Si) - Dose Rate Upset.
  • . . > 1x109 RAD/s (20ns Pulse).
  • Latchup Free.
  • EIA RS-422 Compatible Outputs (Except for IOS).
  • CMOS Inputs.
  • High Impedance Outputs when Disabled or Powered Down.
  • Low Power Dissipation.
  • . . . . 2.75mW Sta.

HS0-26C31RH-Q Distributor