Datasheet4U Logo Datasheet4U.com

HS1-139RH - Radiation Hardened Quad Voltage Comparator

General Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Key Features

  • QML Qualified Per MIL-PRF-38535 Requirements.
  • Radiation Environment - Latch-up Free Under any Conditions - Total Dose (Max).
  • . . . 3 x 105 RAD(Si) - SEU LET Threshold.
  • 20MeV/cm2/mg - Low Dose Rate Effects Immunity.
  • 100V Output Voltage Withstand Capability.
  • ESD Protection to >3000V.
  • Differential Input Voltage Range Equal to the Supply Voltage.
  • Input Offset Voltage (VIO).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS1-82C37ARH-8 Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Q Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Sample Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS10 Feed Sensor Hog Slat
HS100 Crystal Clock Oscillators NEL

Other Datasheets by Intersil (now Renesas)

Part Number Description
HS1-1412RH-Q Radiation Hardened/ Quad/ High Speed/ Low Power/ Video Closed Loop Buffer
HS1-1825ARH Radiation Hardened High-Speed/ Dual Output PWM
HS1-1825ARH-8 Radiation Hardened High-Speed/ Dual Output PWM
HS1-1825ARH-Q Radiation Hardened High-Speed/ Dual Output PWM
HS1-1840ARH Radiation Hardened 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HS-139RH Data Sheet May 1999 File Number 3573.2 Radiation Hardened Quad Voltage Comparator The Radiation Hardened HS-139RH consists of four independent single or dual supply voltage comparators on a single monolithic substrate. The common mode input voltage range includes ground, even when operated from a single supply, and the low supply current makes these comparators suitable for low power applications. These types were designed to directly interface with TTL and CMOS. The HS-139RH is fabricated on our dielectrically isolated Rad Hard Silicon Gate (RSG) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment.