Datasheet4U Logo Datasheet4U.com

HS1-2420RH-Q - Radiation Hardened Fast Sample and Hold

General Description

The HS-2420RH is a radiation hardened monolithic circuit consisting of a high performance operational amplifier with its output in series with an ultra-low leakage analog switch and MOSFET input unity gain amplifier.

Key Features

  • Maximum Acquisition Time - 10V Step to 0.1%.
  • . . 4µs - 10V Step to 0.01%.
  • . 6µs.
  • Maximum Drift Current.
  • . .10nA (Maximum Over Temperature).
  • TTL Compatible Control Input.
  • Power Supply Rejection.
  • . . ≥80dB.
  • Total Gamma Dose.
  • . . 1 x 105 RAD(SI).
  • No Latch-Up Applicat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS1-82C37ARH-8 Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Q Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Sample Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS10 Feed Sensor Hog Slat
HS100 Crystal Clock Oscillators NEL

Other Datasheets by Intersil (now Renesas)

Part Number Description
HS1-2400RH-Q Radiation Hardened PRAM Four Channel Programmable Operational Amplifier
HS1-245RH-8 Radiation Hardened Triple Line(party-Line) Transmitter
HS1-245RH-Q Radiation Hardened Triple Line(party-Line) Transmitter
HS1-246RH-8 Radiation Hardened Triple Line(party-Line) Transmitter
HS1-246RH-Q Radiation Hardened Triple Line(party-Line) Transmitter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HS-2420RH July 1995 Radiation Hardened Fast Sample and Hold Description The HS-2420RH is a radiation hardened monolithic circuit consisting of a high performance operational amplifier with its output in series with an ultra-low leakage analog switch and MOSFET input unity gain amplifier. With an external hold capacitor connected to the switch output, a versatile, high performance sample-and-hold or track-andhold circuit is formed. When the switch is closed, the device behaves as an operation amplifier, and any of the standard op amp feedback networks may be connected around the device to control gain, frequency response, etc. When the switch is opened the output will remain at its last level.