Datasheet4U Logo Datasheet4U.com

ICM7213 - One Second/One Minute Timebase Generator

General Description

The ICM7213 is a fully integrated micropower oscillator and frequency divider with four buffered outputs suitable for interfacing with most logic families.

The power supply may be either a two battery stack (Ni-cad, alkaline, etc.) or a regular power supply greater than 2V.

Key Features

  • Guaranteed 2V Operation.
  • Very Low Current Consumption (Typ) . . . . 100µA at 3V.
  • All Outputs TTL Compatible.
  • On Chip Oscillator Feedback Resistor.
  • Oscillator Requires Only 3 External components: Fixed Capacitor, Trim Capacitor, and A Quartz Crystal.
  • Output Inhibit Function.
  • 4 Simultaneous Outputs: One Pulse/s, One Pulse/Min, 16Hz and Composite 1024 + 16 + 2Hz Outputs.
  • Test Speed-Up Provides Other Frequency Outputs Part Num.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ICM7211 Four Digit Display Decoder/Drivers Maxim Integrated Products
ICM7211 4-Digit LCD Display Driver Harris Semiconductor
ICM7211AM 4-Digit LCD Display Driver Renesas
ICM7212 Four Digit Display Decoder/Drivers Maxim Integrated Products
ICM7212 4-Digit LCD Display Driver Harris Semiconductor

Other Datasheets by Intersil (now Renesas)

Part Number Description
ICM7211A 4-Digit LCD Display Driver
ICM7211AM 4-Digit LCD Display Driver
ICM7216A (ICM7216x) 8-Digit / Multi-Function / Frequency Counters/Timers
ICM7216B (ICM7216x) 8-Digit / Multi-Function / Frequency Counters/Timers
ICM7216D (ICM7216x) 8-Digit / Multi-Function / Frequency Counters/Timers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TM NO RE December 2001 UCT PROD E MENT T E L PLACE E O B SO R D ENDE COMM ICM7213 One Second/One Minute Timebase Generator Description The ICM7213 is a fully integrated micropower oscillator and frequency divider with four buffered outputs suitable for interfacing with most logic families. The power supply may be either a two battery stack (Ni-cad, alkaline, etc.) or a regular power supply greater than 2V. Depending upon the state of the WIDTH, INHIBIT, and TEST inputs, using a 4.194304MHz crystal will produce a variety of output frequencies including 2048Hz, 1024Hz, 34.133Hz, 16Hz, 1Hz, and 1/60Hz (plus composites). The ICM7213 utilizes a very high speed low power metal gate CMOS technology which uses 6.