L7107CPL Datasheet | Intersil

features autozero to less than 10µV, zero drift of less than 1µV/o C, input bias current of 10p A (Max), and rollover error of less than one count. True differential inputs and reference are useful in all systems, but give the designer an unmon advantage when measuring load cells, strain gauges and other bridge type transducers. Finally, the true economy of single power supply operation (ICL7106), enables a high performance panel meter to be built with the addition of only 10 passive ponents and a display. Features - Guaranteed Zero Reading for 0V Input on All Scales - True Polarity at Zero for Precise Null Detection - 1p A Typical Input Current - True Differential Input and Reference, Direct Display Drive - LCD ICL7106, LED l CL7107 - Low Noise - Less Than 15µVP-P - On Chip Clock and Reference - Low Power Dissipation - Typically Less Than 10m W - No Additional Active Circuits Required - Enhanced Display Stability - Pb-Free Plus Anneal Available (Ro HS pliant) Ordering Information PART NO. ICL7106CPL ICL7106CPLZ (Note 2) ICL7106CM44 ICL7106CM44Z (Note 2) ICL7106CM44ZT (Note 2) ICL7107CPL ICL7107CPLZ (Note 2) ICL7107RCPL ICL7107RCPLZ (Note 2) ICL7107SCPL ICL7107SCPLZ (Note 2) ICL7107CM44 ICL7107CM44T ICL7107CM44Z (Note 2) ICL7107CM44ZT (Note 2) NOTES: 1. “R” indicates device with reversed leads for mounting to PC board underside. “S” indicates enhanced stability. 2. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding pounds/die attach materials and 100% matte tin plate termination finish, which are Ro HS pliant and patible with both Sn Pb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3. Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. PART MARKING ICL7106CPL ICL7106CPLZ ICL7106CM44 ICL7106CM44Z ICL7106CM44Z...