Datasheet4U Logo Datasheet4U.com

EL2090 - 100MHz DC-Restored Video Amplifier

Description

TEMP MIN TYP IS Total Supply Current VIDEO AMPLIFIER SECTION (NOT RESTORED) Full 14 VOS Input Offset Voltage IB+ +VIN Input Bias Current IB- -VIN Input Bias Current ROL Transimpedance AVOL Open-Loop Voltage Gain; VOUT = ±2V VO Output Voltage Swing VS = ±15V; RL = 2kΩ VS = ±5V; RL = 1

Features

  • Complete video level restoration system.
  • 0.01% differential gain and 0.02° differential phase accuracy at NTSC.
  • 100MHz bandwidth.
  • 0.1dB flatness to 20MHz.
  • Sample-and-hold has 15nA typical leakage and 1.5pC charge injection.
  • System can acquire DC correction level in 10µs, or 5 scan lines of 2µs each, to 1/2 IRE.
  • VS = ±5V to ±15V.
  • TTL/CMOS hold signal.

📥 Download Datasheet

Datasheet preview – EL2090

📁 Similar Datasheet

  • EL2090C - 100 MHz DC-Restored Video Amplifier (Elantec)
  • EL2099C - Video Distribution Amplifier (Elantec)
  • EL2001C - Low Power/ 70 MHz Buffer Amplifier (Elantec)
  • EL2002C - Low Power/ 180 MHz Buffer Amplifier (Elantec)
  • EL2003C - 100MHz Video Line Driver (Elantec)
  • EL2004 - 350 MHz FET Buffer (Elantec)
  • EL2004C - 350MHz FET Buffer (Elantec)
  • EL2005 - High Accuracy Fast Buffer (Elantec)
  • EL2005C - High Accuracy Fast Buffer (Elantec)
  • EL2006 - High Gain Fast FET Input Op Amp (Elantec)
Other Datasheets by Intersil
  • EL2099 - Video Distribution Amplifier
  • EL2001 - 70MHz Buffer Amplifier
  • EL2002 - 180MHz Buffer Amplifier
  • EL2003 - 100MHz Video Line Driver
  • EL2019 - High Voltage Comparator
  • EL2033 - 100MHz Video Line Driver
  • EL2044 - Low Power/Low Voltage 120MHz Unity-Gain Stable Operational Amplifier
  • EL2045 - Operational Amplifier

Full PDF Text Transcription

Click to expand full text
® cN1o-On8t8Ra8DcE-tIaOCNotOBTauESMrSROTMheSLEcIEeLNhTenDoEtirEcPwDaRlwRSOwEuD.PpiUnpLCtoAeTrrCtsEiClM.ecnEotNmeTr/tasAtcugust 1995, Rev. A EL2090 FN7040 100MHz DC-Restored Video Amplifier The EL2090 is the first complete DCrestored monolithic video amplifier sub-system. It contains a very highquality video amplifier and a nulling sample-and-hold amplifier specifically designed to stabilize video performance. When the HOLD logic input is set to a logic 0 during a horizontal sync, the sample-and-hold amplifier may be used as a general-purpose op-amp to null the DC offset of the video amplifier. When the HOLD input goes to a logic 1 the sample-and-hold stores the correction voltage on the hold capacitor to maintain DC correction during the subsequent scan line.
Published: |