EL2157 Datasheet | Intersil

feature . Applying a low logic level to this pin reduces the supply current to 0µA within 50ns. This is useful for both multiplexing and reducing power consumption. The EL2157 also has an output voltage clamp feature . This clamp is a fast recovery (<7ns) output clamp that prevents the output voltage from going above the preset clamp voltage. This feature is desirable for A/D applications, as A/D converters can require long times to recover if overdriven. For applications where board space is critical the EL2150 is available in the tiny 5-pin SOT-23 package, which has a footprint 28% the size of an 8-pin SO. The EL2150 and EL2157 are both available in an 8-pin SO package. All parts operate over the industrial temperature range of -40°C to +85°C. For dual, triple, or quad applications, contact the factory. Features - Specified for 3V, 5V, or ±5V applications - Power-down to 0µA (EL2157) - Output voltage clamp (EL2157) - Large input mon mode range 0V < VCM < VS - 1.2V - Output swings to ground without saturating - -3d B bandwidth = 125MHz - ±0.1d B bandwidth = 30MHz - Low supply current = 5m A - Slew rate = 275V/µs - Low offset voltage = 2m V max (SO package) - Output current = ±100m A - High open loop gain = 80d B - Diff gain/phase = 0.05%/0.05° Applications - Video amplifiers - PCMCIA applications - A/D drivers - Line drivers - Portable puters - High speed munications - RGB applications - Broadcast equipment - Active filtering Ordering Information PART NUMBER EL2150CS EL2150CS-T7 EL2150CS-T13 EL2150CW-T7 EL2150CW-T7A EL2157CS EL2157CS-T7 EL2157CS-T13 PACKAGE 8-Pin SO 8-Pin SO 8-Pin SO 5-Pin SOT-23 5-Pin SOT-23 8-Pin SO 8-Pin SO 8-Pin SO TAPE & REEL PKG. DWG. # 7” 13” 7” (3K pcs) 7” (250 pcs) 7” 13” MDP0027 MDP0027 MDP0027 MDP0038 MDP0038 MDP0027 MDP0027 MDP0027 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC...