EL2450 Datasheet | Intersil

® Data Sheet EL2250, EL2450 May 19, 2006 FN7061.3 125MHz Single Supply Dual/Quad Op Amps The EL2250/EL2450 are part of a family of the electronics industries fastest single supply op amps available. Prior single supply op amps have generally been limited to bandwidths and slew rates to that of the EL2250/EL2450. The 125MHz bandwidth, 275V/µs slew rate, and 0.05%/0.05° differential gain/differential phase makes this part ideal for single or dual supply video speed applications. With its voltage feedback architecture, this amplifier can accept reactive feedback networks, allowing them to be used in analog filtering applications. The inputs can sense signals below the bottom supply rail and as high as 1.2V below the top rail. Connecting the load resistor to ground and operating from a single supply, the outputs swing pletely to ground without saturating. The outputs can also drive to within 1.2V of the top rail. The EL2250/EL2450 will output ±100m A and will operate with single supply voltages as low as 2.7V, making them ideal for portable, low power applications. The EL2250/EL2450 are available in PDIP and SO packages in industry standard pin outs. Both parts operate over the industrial temperature range of -40°C to +85°C, and are part of a family of single supply op amps. For single amplifier applications, see the EL2150/EL2157. For dual and triple amplifiers with power down and output voltage clamps, see the EL2257/EL2357. Ordering Information PART TAPE & PKG. PART NUMBER MARKING REEL PACKAGE DWG. # EL2250CN EL2250CN - 8 Ld PDIP MDP0031 EL2250CS 2250CS - 8 Ld SO MDP0027 EL2250CS-T7 2250CS 7” 8 Ld SO MDP0027 EL2250CS-T13 2250CS 13” 8 Ld SO MDP0027 EL2250CSZ (Note) 2250CSZ - 8 Ld SO MDP0027 (Pb-free) EL2250CSZ-T7 2250CSZ (Note) 7” 8 Ld SO MDP0027 (Pb-free) EL2250CSZ-T13 2250CSZ (Note) 13” 8 Ld SO MDP0027 (Pb-free) EL2450CN...