EL5146 Datasheet | Intersil

EL5144, EL5146, EL5244, EL5246, EL5444 O1APB0Rm ESE0OELOELp EMDL5LL5L51Ul E51i H524C24Tf44446i TEz44e64r Ssin Rg REl ECe PO-LESMEAELELMCEu L8L8LEE81p81820MN204p01D00E010l EN1y DT Data Sheet Rail-to-Rail The EL5144 series amplifiers are voltage-feedback, high speed, rail-to-rail amplifiers designed to operate on a single +5V supply. They offer unity gain stability with an unloaded -3d B bandwidth of 100MHz. The input mon-mode voltage range extends from the negative rail to within 1.5V of the positive rail. Driving a 75W double terminated coaxial cable, the EL5144 series amplifiers drive to within 150m V of either rail. The 200V/µs slew rate and 0.1%/0.1° differential gain/differential phase makes these parts ideal for posite and ponent video applications. With their voltage feedback architecture, these amplifiers can accept reactive feedback networks, allowing them to be used in analog filtering applications These amplifiers will source 90m A and sink 65m A. March 31, 2011 FN7177.2 Features - Rail-to-rail output swing - -3d B bandwidth = 100MHz - Single-supply +5V operation - Power-down to 2.6µA - Large input mon-mode range 0V < VCM < 3.5V - Diff gain/phase = 0.1%/0.1° - Low power 35m W per amplifier - Space-saving SOT23-5, 8 Ld MSOP and 10 Ld MSOP, and 16 Ld QSOP packages - Pb-Free available (Ro HS pliant) Applications The EL5146 and EL5246 have a power-savings disable feature. Applying a standard TTL low logic level to the CE (Chip Enable) pin reduces the supply current to 2.6µA within 10ns. Turn-on time is 500ns, allowing true break-before-make conditions for multiplexing applications. Allowing the CE pin to float or applying a high logic level will enable the amplifier. For applications where board space is critical, singles are offered in a 5 Ld SOT-23 package, duals in 8 Ld and 10 Ld MSOP packages, and quads in a 16 Ld QSOP package. Singles, duals, and quads are also available in industry standard pinouts in SO and PDIP packages. All parts operate over the...