Intersil HCS244T
HCS244T is a Radiation Hardened NonInverting Octal Buffer/Line Driver, Three-State, with two active-low output enables. The SMD numbers listed below must be used when ordering. Detailed Electrical Specifications for the HCS244T are contained in SMD 5962-95731.| Part No. | HCS244T |
|---|---|
| Datasheet | HCS244T Download |
| Manufacturer |  Intersil |
| Description | Radiation Hardened Octal Buffer/Line Driver/ Three-State |
| Buy | Stock & Price |
APPLICATIONS
FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability. The IntersilFEATURES
● QML Class T, Per MIL-PRF-38535● Radiation Performance - Gamma Dose (γ) 1 x 105 RAD(Si) - Latch-Up Free Under Any Conditions - SEP Effective LET No Upsets: >100 MEV-cm2/mg - Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/Bit-Day (Typ)
● 3 Micron Radiation Hardened CMOS SOS
● Fanout (Over Temperature Range)
● Bus Driver Outputs - 15 LSTTL Loads
● Significant Power Reduction Compared to LSTTL ICs
● DC Operating Voltage Range: 4.5V to 5.5V
● Input Logic Levels - VIL = 0.3 VCC Max - VIH = 0.7 VCC Min
● Input Current Levels Ii ≤ 5µA at VOL, VOH Specifications Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). A “hot-link” is provided from our website for downloading.
