Intersil HCTS245T
HCTS245T is a Radiation Hardened NonInverting Octal Bidirectional Bus Transceiver, Three-State, intended for two-way asynchronous communication between data busses. The HCTS245T allows data transmission from the A bus to the B bus or from the B bus to the A bus. The logic level at the direction input (DIR) determines the data direction.| Part No. | HCTS245T |
|---|---|
| Datasheet | HCTS245T Download |
| Manufacturer |  Intersil |
| Description | Radiation Hardened Octal Bus Transceiver/ Three-State/ Non-Inverting |
| Buy | Stock & Price |
APPLICATIONS
FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability. The Intersil The output enable input (OE) puts the I/O port in the high-impedance state when high.FEATURES
● QML Class T, Per MIL-PRF-38535● Radiation Performance - Gamma Dose (γ) 1 x 105 RAD(Si) - Latch-Up Free Under Any Conditions - SEP Effective LET No Upsets: >100 MEV-cm2/mg - Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/Bit-Day (Typ)
● 3 Micron Radiation Hardened CMOS SOS
● Fanout (Over Temperature Range) - Bus Driver Outputs - 15 LSTTL Loads
● Significant Power Reduction Compared to LSTTL ICs
● DC Operating Voltage Range: 4.5V to 5.5V
● LSTTL Input Compatibility - VIL = 0.8V Max - VIH = VCC/2 Min
● Input Current Levels Ii ≤ 5mA at VOL, VOH Specifications Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC).
