Intersil HCTS574MS
HCTS574MS is a Radiation Hardened non-inverting octal D-type, positive edge triggered flip-flop with three-stateable outputs. The HCTS574MS utilizes advanced CMOS/SOS technology. The eight flip-flops enter data into their registers on the LOW-to-HIGH transition of the clock (CP).| Part No. | HCTS574MS |
|---|---|
| Datasheet | HCTS574MS Download |
| Manufacturer |  Intersil |
| Description | Radiation Hardened Octal D-Type Flip-Flop |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
● 3 Micron Radiation Hardened CMOS SOS Total Dose 200K RAD (Si) SEP Effective LET No Upsets: >100 MEV-cm2/mg Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/BitDay (Typ) Dose Rate Survivability: >1 x 1012 RAD (Si)/s Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse Latch-Up Free Under Any Conditions Fanout (Over Temperature Range) - Bus Driver O11utputs - 15 LSTTL Loads Military Temperature Range: -55oC to +125oC Significant Power Reduction Compared to LSTTL ICs DC Operating Voltage Range: 4.5V to 5.5V LSTTL Input Compatibility - VIL = 0.8V Max - VIH = VCC/2 Min Input Current Levels Ii ≤ 5µA at VOL, VOH GND 10
●
DESCRIPTION
The Intersil Data is also transferred to the outputs during this transition. The output enable (OE) controls the three-state outputs and is independent of the register operation. When the output enable is high, the outputs are in the high impedance state. The HCTS574MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family.
