HIP4081 Datasheet PDF

Intersil HIP4081

The HIP4081 is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081 can drive every possible switch combination except those which would cause a shoot-through condition. The HIP4081 can switch at frequencies up to 1MHz andssssss is well suited to driving Voice Coil Motors, high-frequency Class D audio ampliﬁers, and power supplies.

Part No.	HIP4081
Datasheet	HIP4081 Download
Manufacturer	Intersil
Description	80V/2.5A Peak/ High Frequency Full Bridge FET Driver
Buy	Stock & Price

DESCRIPTION

For example, the HIP4081 can drive medium voltage brush motors, and two HIP4081s can be used to drive high performance stepper motors, since the short minimum “on-time” can provide ﬁne micro-stepping capability. Short propagation delays of approximately 55ns maximizes control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in rapid, precise control of the driven load. A similar part, the HIP4080, includes an on-chip input comparator to create a PWM signal from an external triangle wave and to facilitate “hysteresis mode” switching. See Application Note AN9325 for HIP4081, Intersil AnswerFAX, (407) 724-7800, document #99325. Intersil web home page: Similar part HIP4081A includes undervoltage circuitry which does not require the circuitry shown in Figure 30 of this data sheet. PACKAGE 20 Lead Plastic DIP 20 Lead Plastic SOIC PKG. NUMBER E20.3 M20.3

FEATURES

● Independently Drives 4 N-Channel FET in Half Bridge or...