Intersil HIP5010
The HIP5011 has a PWM pin that inverts the relationship from the input to PHASE. This architecture allows the designer to utilize a low cost single-ended PWM controller in either a current or voltage mode configuration. The SynchroFET operates in continuous conduction mode reducing EMI constraints and enabling high bandwidth operation.| Part No. | HIP5010 |
|---|---|
| Datasheet | HIP5010 Download |
| Manufacturer |  Intersil |
| Description | 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge |
| Buy | Stock & Price |
FEATURES
● Complementary Drive, Half-Bridge Power NMOS● Use With Low-Cost Single-Output PWM Controllers
● Improve Efficiency Over Conventional Buck Converter with Schottky Clamp
● Minimum Deadtime Provided by Adaptive Shoot-Through Protection Eliminates External Schottky
● Grounded Case for Low EMI and Simple Heatsinking
● Low Operating Current
● Frequency Exceeding 1MHz
● Dual Polarity Input Options
● All Pins Surge Protected
APPLICATIONS
● 5V to ≤ 3.3V Synchronous Buck Converters● Pentium and P6 Power Supplies
● PowerPC ™ Power Supplies
● Bus Terminations (BTL and GTL)
● Drive 5V Motors Directly from Microprocessor Pinouts HIP5010IS1, HIP5011IS1 (SIP - VERTICAL) TOP VIEW 7 6 5 4 3 2 1 GND (TAB) PHASE VIN PWM (HIP5010), PWM (HIP5011) VCC VIN PHASE FRONT ROWS = PINS 1, 3, 5, 7 BACK ROWS = PINS 2, 4, 6 Ordering Information PART NUMBER HIP5010IS HIP5010IS1 HIP5011IS HIP5011IS1 TEMP. RANGE (oC) -40 to 85 -40 to 85 -40 to 85 -40 to 85 PACKAGE 7 Ld Gullwing SIP PKG. NO. Z7.05B 7 Ld Stagger...
