Intersil IPM6210A
The IPM6210A is a highly integrated power controller which provides a complete power management solution for mobile CPUs. The IC integrates two PWM controllers and a linear regulator as well as monitoring and protection circuitry into a single 28-lead plastic SSOP package. The two PWM controllers regulate the microprocessor core and I/O voltages with synchronous-rectified buck converters, while the linear regulator powers the CPU clock.| Part No. | IPM6210A |
|---|---|
| Datasheet | IPM6210A Download |
| Manufacturer |  Intersil |
| Description | Precision Dual PWM Controller And Linear Regulator |
| Buy | Stock & Price |
FEATURES
● Provides 3 Regulated Voltages - 0.9V to 2.0V Microprocessor Core (SpeedStepTM Enabled) - 1.5V Microprocessor I/O - 2.5V Microprocessor Clock Generator● High Efficiency Over Wide Load Range
● Not Dissipative Current-Sense Scheme - Uses MOSFET’s rDS(ON) - Optional Current-Sense Resistor for Precision Overcurrent
● Adaptive Dead-Time Drivers for N-Channel MOSFETs
● Operates from +5V, +3.3V and Battery (5.6-24V) Inputs
● Precision Core Voltage Control: - Remote “Kelvin” Sensing - Summing Current-Mode Control - On-Chip Mode-Compensated “Droop” for Optimum Transient Response and Lower Processor Power Dissipation
● TTL-Compatible 5-Bit Digital Output Voltage Selection - Wide Range - 0.925V DC to 1.3VDC in 25mV Steps, and from 1.3VDC to 2.0VDC in 50mV Steps - Programmable “On-the-Fly” VID Code Change with Customer Programmable Slew Rate and 100µs Settling Time
● Power-Good Output Voltage Monitor
● No Negative Voltage on Outputs at Turn-Off
● Overvoltage, Undervoltage and Overcurren...
