ISL70003SEH - 6A Buck Regulator

Intersil (now Renesas)

Key Features

two logic-level disable inputs that can be used to inhibit pulses on the phase (LXx) pins in order to.

ISL70003SEH 6a buck regulator by Intersil (now Renesas) - Datasheet Preview

Datasheet Details

Part number	ISL70003SEH
Manufacturer	Intersil (now Renesas)
File Size	1.89 MB
Description	6A Buck Regulator
Datasheet	ISL70003SEH Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
ISL70001SRH	Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator	Intersil Corporation
ISL71090SEHF25	Radiation Hardened Ultra Low Noise / Precision Voltage Reference	Intersil Corporation
ISL7119RH	Radiation Hardened High Speed Dual Voltage Comparator	Intersil Corporation
ISL7124SRH	Quad Operational Amplifiers	Intersil Corporation
ISL72026SEH	3.3V Radiation Tolerant CAN Transceiver	Intersil Corporation

Other Datasheets by Intersil (now Renesas)

Part Number	Description
ISL70003ASEH	9A Buck Regulator
ISL70001ASEH	Rad Hard and SEE Hard 6A Synchronous Buck Regulator
ISL70001SEH	Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator
ISL70002SEH	Radiation Hardened and SEE Hardened 12A Synchronous Buck Regulator
ISL70005SEH	Radiation Hardened Dual Output 3A Synchronous Buck and LDO Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

DATASHEET Radiation Hardened and SEE Hardened 3V to 13.2V, 6A Buck Regulator ISL70003SEH The ISL70003SEH is a radiation and SEE hardened synchronous buck regulator capable of operating over an input voltage range of 3.0V to 13.2V. With integrated MOSFETs, this highly efficient single chip power solution provides a tightly regulated output voltage that is externally adjustable from 0.6V to ~90% of the input voltage. Continuous output load current capability is 6A for TJ ≤+125°C and 3A for TJ ≤ +150°C. The ISL70003SEH uses voltage mode control architecture with feed-forward and switches at a selectable frequency of 500kHz or 300kHz. Loop compensation is externally adjustable to allow for an optimum balance between stability and output dynamic performance.