Datasheet4U Logo Datasheet4U.com

ISL73002SEH - Radiation Hardened and SEE Hardened 12A Synchronous Buck Regulator

Download the ISL73002SEH datasheet PDF. This datasheet also covers the ISL70002SEH variant, as both devices belong to the same radiation hardened and see hardened 12a synchronous buck regulator family and are provided as variant models within a single manufacturer datasheet.

General Description

PKG.

DWG.

TEMP.

Key Features

  • DLA SMD 5962-12202.
  • Maximum output current (“Single Phase”): - 22A with external Schottky (TJ ≤125°C, PVIN ≤5.5V) - 18A (TJ ≤125°C, PVIN ≤5.5V) - 14A (TJ ≤125°C, PVIN ≤6.2V) - 12A (TJ ≤150°C, PVIN ≤6.2V).
  • Maximum output current (“Dual Phase”) - 38A (27% worst case current sharing).
  • 1MHz or 500kHz switching frequency.
  • 3V to 6.2V supply voltage range.
  • ±1% reference voltage (line, load, temperature, and rad).
  • Redundancy/junction isolat.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ISL70002SEH-Intersil.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET ISL70002SEH, ISL73002SEH Radiation Hardened and SEE Hardened 22A Synchronous Buck Regulators with Current Sharing FN8264 Rev.12.01 Mar 31, 2022 The ISL70002SEH and ISL73002SEH (ISL7x002SEH) are radiation hardened and SEE hardened high-efficiency monolithic, synchronous buck regulators with integrated MOSFETs. This single chip power solution operates over an input voltage range of 3V to 5.5V and provides a tightly regulated output voltage that is externally adjustable from 0.8V to ~85% of the input voltage. Output load current capability is primarily determined by PVIN voltage with up to 22A for a single IC at PVIN ≤ 5.5V for TJ ≤ +125°C. Two ISL7x002SEH devices, configured to current share, can provide up to 38A of total output current at PVIN ≤ 5.