Datasheet4U Logo Datasheet4U.com

ISL90840 - XDCP

General Description

D.N.C.

Key Features

  • Four potentiometers in one package.
  • 256 resistor taps - 0.4% resolution.
  • I2C serial interface - Three address pins, up to eight devices/bus - Write/Read capability.
  • Power-on preset to mid-scale (128 tap position).
  • Wiper resistance: 70 typical @ 3.3V.
  • Standby current.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL90841 Quad Digitally Controlled Potentiometers Low Noise Low Power I2C Renesas
ISL90842 Quad Digitally Controlled Variable Resistors Renesas
ISL90843 Quad Digital Controlled Potentiometers Intersil Corporation
ISL90810 Single Digitally Controlled Potentiometer Renesas
ISL9000 Dual LDO Renesas

Other Datasheets by Intersil (now Renesas)

Part Number Description
ISL9000AM Dual LDO
ISL9008 Low Noise LDO
ISL94200 Multi-Cell Li-ion Battery Pack OCP/Analog Front-End
ISL94201 Multi-Cell Li-ion Battery Pack Analog Front-End
ISL9443 Synchronous Step-Down PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
POSSIOBBLSEOSLUEBXTS9E5TP8IT4RU0OTDEUPDCRaTOtaDSUhCeTet ISL90840 Quad Digitally Controlled Potentiometers (XDCP™) November 14, 2006 FN8086.2 Low Noise, Low Power I2C® Bus, 256 Taps The ISL90840 integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated circuit. The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. Each potentiometer has an associated volatile Wiper Register (WR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper. When powered on the ISL90810’s wiper will always commence at mid-scale (128 tap position).